Reflect On To When Buying Most Realistic Artificial Grass

Commercial artificial grass is very popular nowadays, either as a low-maintenance alternative to a real lawn or as the covering for sports pitches, children’s play areas or mini-golf courses. Once somewhat frowned upon as cheap-looking and tacky, this material has evolved to the point where, more often than not, it is now realistic enough to pass for the real thing.

This is, in no small part, due to the method of production which goes into the average modern most realistic artificial grass. This article will detail the three main factors to consider when assessing the quality of a standard turf carpet, and how each of them contribute to give the material its realistic look and feel, as well as its famed endurance and ease of maintenance.

Pile Height

Pile height refers to the maximum height of the artificial blades on the carpet. This varies depending on the type of carpet and the purpose it will be used for. Landscaping commercial artificial grass, for instance (the type usually seen in back gardens) tends to have blades between 1.5” and 2” in height, while in athletic turf this average increases to between 2.25” and 3”. Putting green grass and pet grass tend to have shorter blades, a maximum of 1.5” in height. Pile height is directly related to how much wear and tear the carpet exhibits over time, though it is not the only factor impacting this.

Face Weight

Face weight refers to the amount of yarn used per square yard in a roll of commercial artificial grass. cost of installing artificial grass is very affordable which only bring turfgrassfortlauderdale us. The more yarn is used, the denser the carpet will be, and the softer it will feel underfoot. Once again, however, face weight is not the only factor determining turf softness; pile height and yarn type should also be taken into consideration.

Backing Weight

Backing weight, as the name indicates, refers to the density of the primary and secondary layers of backing. Primary backing is the material through which the artificial grass blades are punched, and usually consists of two layers; secondary backing refers to the coating applied to the blades to increase their durability and reinforce their binding, which in the case of commercial artificial grass is usually done with polyurethane. The weight of these two components put together gives backing weight, which for a standard roll of commercial artificial grass will usually be around 26 to 28 ounces.